Nacecare-solutions NR20 User Manual download pdf (Page 7)

MACHINE PREPARATION

PREPARING THE MACHINE FOR FIRST USE

Upon delivery of the machine, please ensure that the owner’s manual is read thoroughly. If there

is multiple users for the machine, ensure that they have a full understanding of how to use the

machine in a safe manner.

WATER TANK ASSEMBLY

Put the handle in vertical position, lift up the bracket (A).

Insert the tank (B) so that it is secured to the inner part of

the bracket (C). Lower bracket (A) until it locks in to the

tank. Lock the top bracket in place using the locking nut

(G). Connect the Solution hose (D) to both, the bottom

tank valve (E) and to the machine base (F).

Fill the tank with detergent solution keeping the handle in

vertical position.

The detergent solution should not exceed the temperature

of 50 °C and the detergent must be diluted to the

manufacturers specifications.

WARNING:

• Do not use pure acids

• Do not mix detergents or acids of different

origins.

BRUSH/PAD DRIVER ASSEMBLY

WARNING:

When installing the pad driver/brush by hand,

ensure that the power source is disconnected.

Installing the pad driver/brush with the machine

plugged in can cause serious injury.

For automatic mounting, connect the machine to the

power source, lay the brush/pad driver on the floor (For

pad driver, there must be a pad on the pad driver), bring

the machine over the pad driver and lower it so the chuck

is in the centre of the pad driver. Lower the handle to the

operating position. Pull the lever (A) and lower the handle

to the operating position.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Nacecare-solutions NR20 User Manual Page 7